|
1.Presented
and Published a paper “Crankshaft
Design and Optimization- A Review” in national level paper conference of
“National Conference on Recent Trends in Engineering &
Technology-NCRTET-2011”, ISBN No. : 978-81-921358-4-7,
Organized by BVM Engineering College, V.V.Nagar during 13-14 May 2011
|
|
2.Published A Research Paper on “Optimization of Crankshaft Diameter Using
Genetic Algorithm” in INTERNATIONAL JOURNAL FOR RESEARCH IN
APPLIED SCIENCE AND ENGINEERING TECHNOLOGY (IJRASET),Vol. 2 Issue
II, February 2014 –ISSN:2321
-9653,www.ijraset.com.
|
|
3.Published Research Paper on “Design Formulation
and Optimum Load Carrying Capacity of Hydrodynamic Journal Bearing By using
Genetic Algorithm” in INTERNATIONAL JOURNAL FOR RESEARCH IN APPLIED SCIENCE AND
ENGINEERING TECHNOLOGY (IJRASET),Vol. 2 Issue II, February 2014 –ISSN:2321 -9653,www.ijraset.com.
|
|
4.Published Research Paper on “ Design and Optimization of Crankpin
– A Review” in INTERNATIONAL JOURNAL FOR RESEARCH IN APPLIED SCIENCE AND
ENGINEERING TECHNOLOGY (IJRASET),Vol. 2 Issue III, March 2014 –ISSN:2321 -9653,www.ijraset.com.
|
|
5.Published Research Paper on “ Design Formulation and Optimization of
Crankshaft Diameter for Single Cylinder 4-Stroke Diesel Engine” in The International Journal Of Science
& Technoledge (IJST),Vol. 2 Issue V, May 2014 –ISSN 2321
– 919X ,page 304-308 ,www.theijst.com
|
|
6.Published Research Paper on “ Design and Stress Analysis of
crankshaft of single cylinder four stroke diesel Engine” in INTERNATIONAL JOURNAL FOR
RESEARCH IN APPLIED SCIENCE AND ENGINEERING TECHNOLOGY (IJRASET),Vol.
2 Issue v, May 2014 –ISSN:2321 -9653,www.ijraset.com.
|
|
7.Published Research Paper on “Design
& Development of Automatic Fast food
Machine” in
INTERNATIONAL JOURNAL OF MECHANICAL
ENGINEERING AND ROBOTIC RESEARCH (IJMERR),Vol. 3 No.3 July 2014 –ISSN:2278 -0149, page
145-148 ,www.ijmerr.com.
|
|
8.Published Research Paper on “Design Analysis and
Optimization of Hybrid Piston for 4 stroke Single Cylinder 10 HP (7.35 kW)
Diesel Engine –A Review”
in International Journal of Engineering Trends and Technology (IJETT),
V16(6),258-262 Oct 2014. ISSN: 2231-5381. www.ijettjournal.org. published by seventh sense
research group ,IF:2.696
|
|
9.Published Research Paper on “Efficiency
Improvement of Diesel Engine Pump sets through Oxygen Enrichment by Vacuum
Swing Adsorption Method-A Overview” in
SSRG International Journal of Mechanical Engineering (SSRG-IJME) ,V1(8,)Nov.2014. ISSN: 2348 – 8360. Published by seventh sense
research group ,IF:2.696
|
|
10.Published Research Paper on “A
Review: Six Sigma Implementation Practice in Manufacturing Industries ” in Int. Journal of Engineering Research and
Applications ISSN : 2248-9622, Vol. 4, Issue 11(Version – 4), November 2014,
pp.63-69, www.ijera.com
|
|
11.Published Research Paper on “Stress Analysis, Design Formulation and Optimization of Crankpin of
Single Cylinder Four Stroke Petrol Engine”, in International Journal of Engineering Trends and
Technology (IJETT), V18 (7), 309-314 Dec 2014. ISSN: 2231-5381. www.ijettjournal.org. published by seventh sense research group, IF:2.696
|
|
12.Published Research Paper on “Design Analysis of Connecting rod for 4 stroke Single
Cylinder Petrol Engine”, in International Journal of Emerging Technology and
Innovative Engineering (IJETIE), Volume 1,Issue 2 February2015. ISSN:
2394-6598231-5381. www.ijetie.org.
|
|
13.Published Research paper on “A Review: Design, Modeling and Stress
Analysis of high speed helical gear according to Bending strength and Contact
strength using AGMA and ANSYS” in International Journal of Engineering
Trends and Technology (IJETT), V22(11),526-530 April 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh
sense research group.I.F.1.795
|
|
14.Presented and Published Research
paper on “Optimum Design and
Development of hydrodynamic Journal Bearing for Centre less Grinding Machine”
in National Conference on recent advances in CAD/CAMCAE (RACCC-2015),7 th
August 2015 Organized by Mechanical Engineering Dept., C.U.Shah College of
Engineering and Technology, ISBN No:978-81-907155-1-8
|
|
15.Presented and Published Research
paper on “Design ,Modeling and
Strength Anyalsis of High Speed Helical Gear Using AGMA and ANSYS” in
National Conference on recent advances in CAD/CAMCAE (RACCC-2015), 7 th
August 2015 Organized by Mechanical Engineering Dept.,C.U.Shah College of
Engineering and Technology, ISBN No:978-81-907155-1-8
|
|
16.Presented and Published Research
paper on “EGR For Diesel Engine:
Recent Trends And Perspectives” in International Conference on Emerging
trends in Scientific research (ICESTER-2015),during17-18 December Organized by C.U.Shah College of
Engineering and Technology,
|
|
17.Presented and Published Research
paper on “ Oxygen Enrichment In Diesel Engine By Vacuum Swing Adsorption Method”
in International Conference on Emerging trends in Scientific research
(ICESTER-2015),during17-18 December
Organized by C.U.Shah College of Engineering and Technology,
ISBN:978-2-642-14819-9
|
|
18.Published Research paper on “ Design, Modelling and Failure Analysis of Rolling Key in 10-Ton
C-Type Mechanical Power Press” in International
Journal of Advanced Engineering, Management and Science, Vol-2,
Issue-4, April 2016,Impact Factor-3.585,editor@ijaems.com,ISSN : 2454-131, Page No: 113-116
|
|
19.Published Research paper on “Design, Modelling and Analysis of
Structural Strength of Cylinder and Cylinder Head of 4-stroke (10 H.P.) C.I.
Engine - A Review” in International
Journal of Advanced Engineering, Management and Science, Vol-2,
Issue-4, April 2016,Impact Factor-3.585,editor@ijaems.com,ISSN : 2454-131, Page No: 156-162.
|
|
20.Presented
and Published Research paper on “Design, Modeling and Strength analysis of
Exhaust Valve for 4 stroke single cylinder 10 HP (7.35 kW) Diesel engine”
in 3rd
International Conference on “Latest
Innovations in Science, Engineering and Management” ICLISEM - 2017
held at The International Centre Goa, Panjim, Goa(India) on 19 February 2017, ISBN: 978-93-86171-17-7,Page
No:337-344.
|
|
21.Published
Research paper on “Design, Modeling and Strength analysis of
Exhaust Valve for 4 stroke single cylinder 10 HP (7.35 kW) Diesel engine”
in International Journal of Advanced Technology and Engineering
Science,Vol-5,Issue-2,February 2017, Impact Factor- 2.87,Page
No:337-344,ISSN:2348-7550
|
|
22.Published
Research paper on " Design,
Modeling and Strength Analysis of Connecting Rod for 4 Stroke Single Cylinder
10 Hp (7.35 kw) Diesel Engine-A Review " , International Journal of
Mechanical and Production Engineering (IJMPE) , pp. 53-56, Volume-6,Issue-1 -January
2018, Impact Factor-4.022-, ISSN: 2320-2092 (Print),2321-2071 (Online)UGC-Approved
|
|
23.Published
Research paper on "Optimum
Design and Development of Mechanized Food Processing Machine with Oil
Extractor ",International Journal of Emerging
Technologies in Engineering Research (IJETER) Volume 6, Issue 4, April (2018) pp-186-189,Impact
Factor-4.225-, ISSN: 2454-6410-UGC-Approved
|